2.7V~7V 16-Pin SI9145 DC to DC converter IC 1 Outputs 2kHz~2MHz Transistor Driver

As a result of 16-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. An enclosure of Bulk is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 2.7V~7V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -25°C~85°C TA is the -25°C~85°C TArm. The switching controller is capable of switching at the 2kHz~2MHz position. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Enable, Frequency Control, Soft Start. A search for "SI9145" will reveal other relevant dc to dc converter ics. 16 pins are present on switching converter. Statistically, the DC regulator outputs 2.6V voltage. It's important to remember that the dc dc regulator's normaloutput current is 200mA, so you should note it down when starting a new project. The maximum duty cycle of this voltage regulator dc to dc is set to 100 % to ensure reliability during power-up and power-down. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulators have a maximum frequency of 2MHz. A temperature -25°C lower than -25°C should be maintained. A temperature of 85°C more than 85°C degrees Celsius should be maintained in the undc regulator. Supplier dc dc controller package for this part is 16-SOIC. Voltage is rated 7V for maximum supply.