14 Terminals 9.5V~13.5V 14-Pin SI9110 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 40kHz~1MHz Transistor Driver

It comes in the 14-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. It is sufficient to generate 1 outputs with this dc motor controller. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. The program can handle Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 9.5V~13.5V. Qualified to work in an dc switcher with -40°C~85°C TA. The switching controller can be switched at 40kHz~1MHz. dc dc regulators can be carried out with Surface Mount. Enable, Reset provides dcdc regulator efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a DUAL terminal on the switching converters. Different dc switching's functions can be applied to 14 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input of 48V. SI9110 can be searched for other relevant dc to dc converter ics. In total, switching converter has 14 pins. Statistically, DC regulator outputs 9.7V volts. In most cases, the output current of the dc dc regulator will be 10mA, so note that when you start the project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 50 %. DC switcher's Surface Mount qualifies it for most applications and prototypes. 3MHz is the frequency of the switching controller. 120V is the nominal working voltage. The maximum input voltage of the dc switcher is 120V, so users need to limit the voltage accordingly. Components may be damaged if their current is greater than 5mA.