20 Terminals 10V 20-Pin SI9102 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 40kHz~1MHz Tape & Reel (TR) 20-LCC (J-Lead)

Using the Tape & Reel (TR) package, this voltage regulator optimizes the performance of the voltage regulator 12v. A voltage regulator consists of 20 terminations. There is a SWITCHING REGULATOR type analog IC in this voltage regulator 12v that is used to convey analog signals. There is a 20-LCC (J-Lead) package available for this voltage regulator, as DC DC switching regulator is space-saving. 1 outputs have been configured in the voltage regulator 12v. On its output pins, this adjusting voltage regulator generates Fixed output. Switching regulators like this one can be mounted on the Surface Mount mounting system. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~85°C TA. In this voltage regulator 12v, the switching frequency is 40kHz~1MHz. Regulator 10V can operate with dc to dc voltage regulator's minimum input voltage 10V. Voltage regulator's input voltage can reach 120V. A regulator with this 250 peak reflow temperature is essentially indestructible. For operation, switching regulator requires a nominal input voltage of 10V. SI9102 is a family of voltage regulators that belong to the DC/DC industry. Voltage regulator is capable of giving voltage at 4V volts. In order to operate voltage regulator, 20 pins are required. With a supply voltage of 13.5V, this harley voltage regulator works. In normal circumstances, 150μA are the output current of DC DC switching regulator.