20 Terminals 10V 20-Pin SI9100 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 40kHz~1MHz Tape & Reel (TR) 20-LCC (J-Lead)

As a result of the use of the Tape & Reel (TR) package, the performance of this voltage regulator is optimized. As you can see, this harley voltage regulator contains 20 terminations. There are two types of analog ICs on this voltage regulator. The first type is a SWITCHING REGULATOR-type IC. Space-saving 20-LCC (J-Lead) packages are available for this harley voltage regulator. There are 1 outputs configured on the voltage regulator. The voltage regulator 12v fits the Surface Mount mounting hole. This voltage regulator 12v should operate at a temperature of -40°C~85°C TA when operating. 40kHz~1MHz is the switching frequency of this DC-DC switching regulator. A dc to dc voltage regulator's minimum input voltage of 10V is required for this voltage regulator to operate. The maximum input voltage of voltage regulator is 70V. As a result of its peak reflow temperature, this voltage regulator is virtually indestructible. To meet the switching regulator operation requirements, a nominal input voltage of 10V is provided. DC/DC regulators such as this one belong to the SI9100 family of products. Voltage of voltage regulator can be delivered at 4V volts. In order to operate voltage regulator, there are 20 pins that must be connected. DC-DC switching regulator with 13.5V supply voltage. It is normal for the output current of adjusting voltage regulator to be 150μA.