LM119J/883 Overview
In order to make transportation easier, it is packaged in CDIP .A comparator with an output type of OPEN-COLLECTOR is being used.We ship the part through Rail/Tube .As you can see, the comparator has14 terminals.Electronic comparator is a part of Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 15V voltage.A total of 14 pins are included.The comparator consists of 14 pins.There is a Through Hole on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 11mA .Comparator electronics follows that the voltage gain of the part is 92.04dB .In general, temperatures higher than 125°C are not recommended.Comparator electronics will not be able to function at temperatures below -55°C .A comparator's maximum supply voltage is 36V volts.Using a voltage as low as 5V is possible for this comparator.For the output quality to be maintained, 2 channels work together.There is essentially a very high gain COMPARATOR amplifier in the comparator.A 25mA output current is specified for this device.
LM119J/883 Features
OPEN-COLLECTOR output capability
Voltage Gain: 92.04dB
COMPARATOR amplifier
LM119J/883 Applications
There are a lot of Texas Instruments
LM119J/883 linear comparators applications.
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
- General Purpose Low Voltage Applications