75ns, 50ns SPST - NC 60Ohm Analog Switches DG9262 100pA 8-SOIC (0.154, 3.90mm Width)
The electronic part can be shipped overseas conveniently because it is packaged in 8-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. This electronic part offers high-quality output due to its 2 channels. The analog switch ics are built using SPST - NC switching circuits. A total of 2 circuits make up this switch device. Search with DG9262 if you are looking for analog multiplexer variants. It has an internal resistance of 60Ohm. The functions of 8 pins can be found in the datasheets. In normalcircumstances, users should not exceed 12V volts for the multiplexer. Single supply type digital switch with a low cost. 2.7V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 1μA. A voltage of 2.7V~12V is required to drain this analog switch from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 1μA. There are 2 inputs to be operated. During operation, the multiplexer should not be exposed to a temperature above 85°C. The analog switch ics has 2 outputs. Suppliers offer the 8-SOIC package.