DG1412EN-T1-GE4 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-VQFN Exposed Pad. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~125°C TA is the extended operating temperature. In total, there are 16 terminations. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. The analog switch ics are built using SPST - NO switching circuits. A total of 4 circuits make up this switch device. Search with DG1412 if you are looking for analog multiplexer variants. It has an internal resistance of 1.8Ohm. The functions of 16 pins can be found in the datasheets. In normalcircumstances, users should not exceed 24V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. 4.5V is the lowest voltage that should be fed to the electronic electronic part. A digital multiplexer may suffer damage if voltage is applied above 1μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 15V. In the case of dual power supplies, you should connect at least 4.5V.

DG1412EN-T1-GE4 Features

1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 210MHz

DG1412EN-T1-GE4 Applications

There are a lot of Vishay Siliconix
DG1412EN-T1-GE4 Analog Switches & Multiplexers ICs applications.

• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems