2.5 V V FPGAs APA750 Series 180 MHz MHz PQFP-208

In the PQFP-208 package, you will find fpga chips. The device has 158 I/O ports for more coherent data transfer. Surface Mount-connectors can be used to attach this FPGA module to the development board. There is a 2.3V ~ 2.7V-volt supply voltage required for the device to operate. The APA750 Series is one of the types of FPGAs that belong to this type. As far as the operating temperature is concerned, it should be kept within -40 to 85 °C when operating. Unlike other FPGA models, this one is contained in Tray for the sake of space saving. Fpga chips is important to note that this device has a RAM capacFpga chipsy of 147456 bFpga chipss. It is crucial that the RAM si18 kBe of this FPGA module reaches 18 kB so that the program can run normally. In order to make it work, 208 pins have been designed. In order for this FPGA to work properly in accordance with its specifications, it is necessary that it is mounted in Surface Mount. Its flexibility is fully utilized when operated with a supply voltage of 2.5 V. As a result of the design of this module, the maximum operating temperature reaches 85 °C. There should be a temperature difference between -40 °C and the operating temperature. There are 750000 gates in its basic building block. Fpga semiconductor is important to note that the data is stored and transferred in 32768 different registers. The high efficiency of this device is provided by its 180 MHz-frequency operation. Fpga semiconductor can accept a maximum voltage of 2.7 V volts as a supply voltage. A minimal supply voltage of 2.3 V is required for it to operate. It is possible to achieve a speed of up to 180 MHz with this FPGA. Its supplier package is called 208-PQFP (28x28).