2.5 V V FPGAs APA750 Series BGA-456
There are two packages that contain fpga chips: BGA-456 package and X package. Having 356 I/Os makes data transfers more coherent. An attachment Surface Mount allows the FPGA module to be attached to the development board. The supply voltage of the device is 2.3V ~ 2.7V , at which it runs. The APA750 series FPGA is a type of FPGA that belongs to the APA750 family of FPGAs. When operating the machine, it is important to keep the temperature within 0 to 70 °C range. There is an FPGA model contained in Tray in order to conserve space. A device like this one offers 147456 RAM bits, which is a considerable amount of memory. This FPGA module has a RAM si18 kBe of 18 kB that is sufficient to make sure that the program is able to run normally. In this case, there are 456 pins on the board. Having stated that, if this FPGA is mounted in Surface Mount, then it may be able to perform fantastically according to its specifications. The 2.5 V supply voltage provides designers with full flexibility in their designs. During its maximal operating temperature, this module reaches 70 °C. In order to achieve 0 °C, the operating temperature must be higher than 0 °C. The building block that forms the basis of the system contains 750000 gates. This device has a pin count of 456 in fpga semiconductor. The data is stored and transferred using 32768 registers that are used for this purpose. A maximum supply voltage of 2.7 V can be applied to this product. The minimal supply voltage required for it is 2.3 V. As far as the speed of this FPGA is concerned, it can get up to 180 MHz. The device package supplied by 456-PBGA (35x35) is one of its suppliers.