5V 2.54mm PMIC 40 Pin 5V DIP
There are 24 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is part of the DIP package.The device has 24 inputs and outputs.There are 40 terminations programmed into the device.As the terminal position of this electrical part is DUAL, it serves as an important access point for passengers or freight.Power is supplied by a voltage of 5V volts.It is programmed with 40 pins.The device can also be used to find NO.It is possible to construct digital circuits using 2500 gates, which are devices that serve as building blocks.High efficiency requires a voltage supply of 5V.It is recommended to store data in EEPROM.Through Hole mounts this electronic component.40 pins are included in its design.With a maximum supply voltage of [0], it operates.The device is designed to operate with a minimal supply voltage of 4.75VV.In order for the device to operate, it requires 5V power supplies.It is recommended that the operating temperature exceed 0°C.There should be a temperature below 70°C at the time of operation.A total of 13dedicated inputs are available for the purpose of detecting input signals.It is recommended that the maximum frequency be less than 71MHz.Programmable logic types can be divided into EE PLD.