TPS68000DBT Overview

In accordance with the materials used by Tube.A low package cost makes the 30-TFSOP (0.173, 4.40mm Width) a popular choice among electronic manufacturers.PCB mounting is done using Surface Mount.Type CCFL Controller is the standard grade for standard applications.Power supply voltage ensures its normal operation.Operating it at -40°C~85°C is always a good idea.Even at 30kHz~100kHz frequency, it remains accurate.Best part of the device is the number TPS68000.The terminations are 30.Devices run on 1 functions.25mA is set as the supply current of the device.There is no change to the pin number of the component.The total number of pins in its sum is 30.A Surface Mount-direction mount is used.Here, 25mA is the output current.A device like this can be controlled by 12V's output.This device can only operate with a 30V-volt supply voltage.The supply voltage 8V is required to make it function.It is common to see outputs that are 1.As far as output current is concerned, it works in 25mA range at most.

TPS68000DBT Features

Mounting type of Surface Mount
1 outputs

TPS68000DBT Applications

There are a lot of Texas Instruments
TPS68000DBT Lighting Controllers applications.

• To reduce power noise & signal noise
• To enhance power efficiency
• Coupling or blocking
• Smoothing
• Decoupling or bypassing
• Noise filtering
• DC/DC, DC/AC, and AC/AC converters
• Frequency converters
• Spot welding
• Flashtube ignition