TPS64201DBVT Overview

With a SOT-23-6 package, the switching controller is suitable for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. A solid enclosure of Cut Tape (CT) surrounds pmic. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control has a supply voltage and operating voltage of 1.8V~6.5V. Worked in an dc switcher with a -40°C~85°C TA rating. The Surface Mount value makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Enable. A SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. An array of 6 terminations of dc switching. The nominal DC switcher's voltage input is 3.8V. Search for "TPS64201" to find other relevant dc to dc converter ics. There are a total of 6 pins on switching converter. The test statistics indicate that DC regulator outputs a voltage of 6.5V. You should note that the dc dc regulator's usual output current is 3A. In a dormant state, the dc switching uses 20μA. Input voltage can be set to 3.8V for nominal working status. The dc switcher's maximum input voltage is 6.5V, so users must limit the voltage accordingly. A voltage of 1.8V is required for the supply. There will be 3A output current greater than 3A from the dc switcher. Datasheets indicate that the switching converter can output 6.5V volts at its maximum. There is 1.2V voltage output lower than 1.2V on the voltage controller. The frequency at which this controller performs well is 450kHz.

TPS64201DBVT Features

Transistor Driver Outputs
Enable
Switching Frequency: 450kHz

TPS64201DBVT Applications

There are a lot of Texas Instruments
TPS64201DBVT DC to DC converter applications.

• Servo drive system
• Digital display device
• Linear guide
• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors