6 Terminals 6-Pin DC to DC converter IC SWITCHING CONTROLLER
It comes in the SOT-23 package, which makes switching controller suitable for most applications. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a DUAL terminal on the switching converters. Different dc switching's functions can be applied to 6 terminations. DC switcher's voltage input of 3.8V. In total, switching converter has 6 pins. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 100 %. DC switcher's Surface Mount qualifies it for most applications and prototypes. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 6.5V. The temperature should be at least -40°C. DC regulator should run at a temperature 85°C higher than 85°C. As a whole, there are 1 function(s) in the switch converters. Dormant dc switchings use 20μA. Designing voltage regulators switchings with 6 pins is one of the most important aspects of the process. A 3A input switching controller would benefit from it. When it is working normally, it outputs a value of 6.5V. This controller contains 1 phases.