10 Terminals 10-Pin TPS63031 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs Tape & Reel (TR) 900mA Switch 10-WFDFN Exposed Pad
It uses the Tape & Reel (TR) package in order to optimize the performance of this voltage regulator. During the development of this harley voltage regulator, 10 terminations were made. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. The harley voltage regulator is available as a 10-WFDFN Exposed Pad package to save space. The voltage regulator is configured with 1 outputs. As you can see, this DC DC switching regulator generates Fixed output on its output pins. A Surface Mount mounting is required for this switching regulator. Voltage regulators should be operated at -40°C~85°C TA temperature while operating. Featuring a 900mA Switch output current, dc to dc voltage regulator offers maximum design flexibility. There is a voltage regulator maximum input voltage of 5.5V. This voltage regulator's peak reflow temperature is so high as to make it virtually indestructible. For operation, voltage regulator provides a nominal input voltage of 3.6V. There is a DC/DC regulator in this family that belongs to the TPS63031 family. At 3.3V volts, voltage regulator can provide voltage. To operate the voltage regulator 12v, 10 pins are required. The output voltage of this voltage regulator 12v should at least be set at 3.267V volts at all times. Accordingly, dc to dc voltage regulator's maximum output current is 800mA A. A maximum voltage of 3.3V can be obtained from the regulator voltage. Voltage regulator consumes 25μA A of quiescent current without being affected by outside forces. In order to ensure reliable performance, the dc to dc voltage regulator's minimum supply voltage is 1.8V volts. An operating voltage of 5.5V is the maximum supply voltage DC DC switching regulator can operate at. A frequency of 2.4MHz allows dc to dc voltage regulator to maintain high accuracy.