10 Terminals 2.5V 10-Pin TPS62401 DC DC Voltage Regulator DUAL SWITCHING CONTROLLER 2 Outputs 2.25MHz Cut Tape 400mA, 600mA 10-VFDFN Exposed Pad

A Cut Tape package is used in this voltage regulator to optimize performance. In this voltage regulator, 10 terminations are present. A DUAL SWITCHING CONTROLLER analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. In order to save space, this voltage regulator is packaged in the 10-VFDFN Exposed Pad package. 2 outputs of voltage regulator are configured. Adjustable, Fixed outputs are generated on the output pins of this adjusting voltage regulator. A voltage regulator 12v such as this one fits the Surface Mount mounting bracket. Keeping dc to dc voltage regulator's operating temperature at -40°C ~ 85°C (TA) is essential when operating. A DC-DC switching regulator such as this one switches at 2.25MHz. Voltage regulators like this one can operate at least with 2.5V as the dc to dc voltage regulator's minimum input voltage. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 1.1V, 1.575V (1.8V). This voltage regulator 12v features maximum design flexibility thanks to its 400mA, 600mA output current. As far as the voltage input is concerned, DC DC switching regulator can accept up to 6V. Due to its 260 high peak reflow temperature, this voltage regulator 12v is virtually indestructible. An input voltage of 3.6V is required to meet the requirements of the switching regulator operation. As a member of the TPS62401 family of DC/DC regulators, this is a DC/DC regulator. During switching regulator operation, 10 pins are used. Ideally this switch regulator should have an output voltage of about 1.1V at the very least. A maximum output current of 400mA A is provided to meet the switching regulator operation requirements. The maximal output voltage of -- allows adjusting voltage regulator for simple operation. DC DC switching regulator offers a maximum output voltage of 1.575V as its maximum output voltage. Known as a switching DC-DC regulator, this electronic voltage regulator 12v is part of the -- family. There are no external factors that affect DC DC switching regulator's consumption of 32μA A of quiescent current. In order to ensure reliable performance, a dc to dc voltage regulator's minimum supply voltage of 2.5V V is required. Switching regulators with the ALSO HAS PFM CONTROL TECHNIQUE; ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 6V feature are more efficient and stable than those without. Operating at the high-limit maximum operating temperature 85°C makes the voltage regulator stable. To ensure reliability, the voltage regulator 12v operates at a minimum operating temperature of -40°C. An input voltage of 2.5V is the minimum voltage that it supports. At its maximum voltage, this DC-DC switching regulator is designed to sustain a 6V input voltage. There is a maximum input voltage of 6V that DC DC switching regulator can operate from. With a frequency of 2.25MHz, dc to dc voltage regulator has high accuracy. There are 10 pins on this voltage regulator. It is possible to output voltages of 1.8V from this voltage regulator 12v.