16 Terminals 16-Pin TPS62363 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 2.5MHz Cut Tape (CT) 2.5A 16-UFBGA, DSBGA

optimized performance is achieved by utilizing the Cut Tape (CT) package in this voltage regulator. Throughout this voltage regulator, there are 16 terminations. There are two types of analog ICs in this voltage regulator 12v: SWITCHING REGULATOR ICs, which are the ones used in older voltage regulator 12vs. The space-saving 16-UFBGA, DSBGA package is available for this voltage regulator. The voltage regulator 12v has 1 outputs. The adjusting voltage regulator generates Adjustable (Programmable) output. As the name implies, this voltage regulator 12v is designed for mounting on a Surface Mount bracket. During switching regulator operation, the operating temperature should remain at -40°C~85°C TA. This voltage regulator 12v reaches a switching frequency of 2.5MHz. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.5V 1V 1.2V 1.36V 1.5V. A maximum design flexibility is provided by the 2.5A output current of voltage regulator. There is a maximum input voltage of 5.5V for this voltage regulator 12v. The voltage regulator 12v is designed to provide a nominal input voltage of 3.6V for operation. In the particular voltage regulators, the TPS62363 family is represented. A voltage of 1.77V volts can be generated by DC DC switching regulator. There are 16 pins used for switching regulator operation. For this switching regulator, we recommend keeping the output voltage at at least 500mV volts. A 3A A maximum output current is required to meet the switching regulator operation requirements. With a maximum output voltage of 1.77V, DC DC switching regulator has a very high efficiency. In the DCS-Control™ family, this part palys an important role in DC DC switching regulator's traget applications. With 5.5V as the supply voltage, this DC-DC switching regulator will operate. External factors have no impact on DC DC switching regulator's ability to consume 56μA A of quiescent current. In this case, a dc to dc voltage regulator's minimum supply voltage of 2.5V volts is required to ensure reliable performance.