8 Terminals 2.7V 8-Pin TPS62304 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 3MHz Tape & Reel (TR) 8-VFBGA, DSBGA

For optimal performance, this voltage regulator uses the Tape & Reel (TR) package. In this voltage regulator, there are 8 terminations. As a matter of fact, the type of analog IC that this voltage regulator 12v is equipped with is called SWITCHING REGULATOR. Space savings are achieved by placing this voltage regulator in the 8-VFBGA, DSBGA package. There are 1 outputs on DC DC switching regulator. Adjusting voltage regulator's output pins generate Fixed output. There is a switching regulator that is compatible with the Surface Mount mounting. As long as its operating temperature is -40°C~85°C TA, dc to dc voltage regulator should perform well. There is a switching frequency of 3MHz for this voltage regulator 12v. Input voltage 2.7V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. The output voltage (Min/Fixed) of this voltage regulator 12v is 1.2V. As a result of the 260 peak reflow temperature, this regulator is essentially indestructible. As a result of DC DC switching regulator's design, it is designed to provide an input voltage of 3.6V for the purposes of operation. As part of the TPS62304 series of regulators, the voltage regulators can be found. There is a possibility that DC DC switching regulator can give voltage at 1.2V volts. The switching regulator operation is carried out by 8 pins. In order for this switching regulator to work properly, the output voltage should be at least 1.2VV. Switching regulator has a maximum output current of 500mA A, which is sufficient to meet the requirements of operation. Switching regulators operate at 6V supply voltages. There is no external influence on harley voltage regulator as it consumes 86μA A of quiescent current. In addition to adding efficiency and stability to the harley voltage regulator, the PFM CONTROL TECHNIQUE IS ALSO POSSIBLE feature brings even greater benefits.