5 Terminals 2V 5-Pin TPS62260 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 2.25MHz Tape & Reel (TR) SOT-23-5 Thin, TSOT-23-5
For optimal performance, this voltage regulator uses the Tape & Reel (TR) package. In this voltage regulator, there are 5 terminations. As a matter of fact, the type of analog IC that this voltage regulator 12v is equipped with is called SWITCHING REGULATOR. Space savings are achieved by placing this voltage regulator in the SOT-23-5 Thin, TSOT-23-5 package. There are 1 outputs on DC DC switching regulator. Adjusting voltage regulator's output pins generate Adjustable output. There is a switching regulator that is compatible with the Surface Mount mounting. As long as its operating temperature is -40°C~85°C TA, dc to dc voltage regulator should perform well. There is a switching frequency of 2.25MHz for this voltage regulator 12v. Input voltage 2V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. The output voltage (Min/Fixed) of this voltage regulator 12v is 0.6V. As a result of the 260 peak reflow temperature, this regulator is essentially indestructible. As a result of DC DC switching regulator's design, it is designed to provide an input voltage of 3.6V for the purposes of operation. As part of the TPS62260 series of regulators, the voltage regulators can be found. There is a possibility that DC DC switching regulator can give voltage at 6V volts. The switching regulator operation is carried out by 5 pins. In order for this switching regulator to work properly, the output voltage should be at least 600mVV. Switching regulator has a maximum output current of 600mA A, which is sufficient to meet the requirements of operation. There is a maximum output voltage of 6V from this voltage regulator 12v. Switching regulators operate at 6V supply voltages. There is no external influence on harley voltage regulator as it consumes 15μA A of quiescent current.