16 Terminals 3V 16-Pin TPS62151 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 2.5MHz Tape & Reel (TR) 16-VFQFN Exposed Pad

It uses the Tape & Reel (TR) package in order to optimize the performance of this voltage regulator. During the development of this harley voltage regulator, 16 terminations were made. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. The harley voltage regulator is available as a 16-VFQFN Exposed Pad package to save space. The voltage regulator is configured with 1 outputs. As you can see, this DC DC switching regulator generates Fixed output on its output pins. A Surface Mount mounting is required for this switching regulator. Voltage regulators should be operated at -40°C~85°C TA temperature while operating. DC-DC switching regulators reach 2.5MHz switching frequencies. Despite its low input voltage, this voltage regulator can operate. There is a voltage regulator maximum input voltage of 17V. This voltage regulator's peak reflow temperature is so high as to make it virtually indestructible. For operation, voltage regulator provides a nominal input voltage of 12V. There is a DC/DC regulator in this family that belongs to the TPS62151 family. At 1.8V volts, voltage regulator can provide voltage. To operate the voltage regulator 12v, 16 pins are required. The output voltage of this voltage regulator 12v should at least be set at 1.8V volts at all times. Accordingly, dc to dc voltage regulator's maximum output current is 1A A. A maximum voltage of 1.8V can be obtained from the regulator voltage. As the name implies, this voltage regulator belongs to the DCS-Control™ family of voltage regulators, and it is a type of switching DC-DC regulator. Voltage regulator consumes 17μA A of quiescent current without being affected by outside forces. The switching regulator can be operated with a 12VV power supply and is suitable for use with that voltage.