16 Terminals 16-Pin TPS62130 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 2.5MHz Tape & Reel (TR) 16-VFQFN Exposed Pad
For optimal performance, this voltage regulator uses the Tape & Reel (TR) package. In this voltage regulator, there are 16 terminations. As a matter of fact, the type of analog IC that this voltage regulator 12v is equipped with is called SWITCHING REGULATOR. Space savings are achieved by placing this voltage regulator in the 16-VFQFN Exposed Pad package. There are 1 outputs on DC DC switching regulator. Adjusting voltage regulator's output pins generate Adjustable output. There is a switching regulator that is compatible with the Surface Mount mounting. As long as its operating temperature is -40°C~85°C TA, dc to dc voltage regulator should perform well. There is a switching frequency of 2.5MHz for this voltage regulator 12v. The output voltage (Min/Fixed) of this voltage regulator 12v is 0.9V. The maximum input voltage of this voltage regulator 12v is 17V. As a result of the 260 peak reflow temperature, this regulator is essentially indestructible. As a result of DC DC switching regulator's design, it is designed to provide an input voltage of 12V for the purposes of operation. As part of the TPS62130 series of regulators, the voltage regulators can be found. There is a possibility that DC DC switching regulator can give voltage at 6V volts. The switching regulator operation is carried out by 16 pins. In order for this switching regulator to work properly, the output voltage should be at least 900mVV. Switching regulator has a maximum output current of 3A A, which is sufficient to meet the requirements of operation. There is a maximum output voltage of 6V from this voltage regulator 12v. The switching DC-DC regulator belongs to the DCS-Control™ family of electronic voltage regulator 12vs. Switching regulators operate at 17V supply voltages. There is no external influence on harley voltage regulator as it consumes 17μA A of quiescent current. The 3V V dc to dc voltage regulator's minimum supply voltage ensures reliable performance. I would recommend this voltage regulator for use on a 12V volt supply, as it is suitable for this application.