10 Terminals 2.7V 10-Pin TPS62050 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs Tube 800mA 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

For optimal performance, this voltage regulator uses the Tube package. In this voltage regulator, there are 10 terminations. As a matter of fact, the type of analog IC that this voltage regulator 12v is equipped with is called SWITCHING REGULATOR. Space savings are achieved by placing this voltage regulator in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. There are 1 outputs on DC DC switching regulator. Adjusting voltage regulator's output pins generate Adjustable output. There is a switching regulator that is compatible with the Surface Mount mounting. As long as its operating temperature is -40°C~125°C TJ, dc to dc voltage regulator should perform well. Input voltage 2.7V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. The output voltage (Min/Fixed) of this voltage regulator 12v is 0.7V. This voltage regulator 12v offers maximum design flexibility with an output current of 800mA. As a result of the 260 peak reflow temperature, this regulator is essentially indestructible. As a result of DC DC switching regulator's design, it is designed to provide an input voltage of 7.2V for the purposes of operation. As part of the TPS62050 series of regulators, the voltage regulators can be found. There is a possibility that DC DC switching regulator can give voltage at 6V volts. The switching regulator operation is carried out by 10 pins. In order for this switching regulator to work properly, the output voltage should be at least 700mVV. Switching regulator has a maximum output current of 800mA A, which is sufficient to meet the requirements of operation. There is a maximum output voltage of 6V from this voltage regulator 12v. Switching regulators operate at 10V supply voltages. There is no external influence on harley voltage regulator as it consumes 12μA A of quiescent current. A frequency of 850kHz permits DC DC switching regulator to maintain a high level of accuracy.