TPS61311YFFR Overview
On the board, there is also a 20-UFBGA, DSBGA package that saves space.In LED drivers, the outputs are all set to 3.Surface Mount is used for mounting the led light driver.There is no doubt that this is a very efficient and reliable DC DC Regulator.The LED driver has the capability of operating at a temperature of -40°C~85°C TA.Backlight, Camera Flash has significant advantages.Frequency 1.92MHz is the basis of operation.A termination of 20 is used to operate the LED driver.The LED light driver is configured with a base of 0 pins.Failures may occur if the voltage supply is below 2.5V.We estimate that there are 2 segments.There is a mounting of it by Surface Mount.LED drivers can be found under the base part number TPS61311.It is acceptable for the voltage to be 5.5V.In this device, the output voltage is 2.5V~5.7V volts.In addition to Display Drivers, [1] is assigned in accordance with its characteristics.This system is designed to operate at a minimum voltage of 2.5V to achieve maximum efficiency.In order to maintain maximum efficiency, the supply current cannot exceed 11.3mA.The current that can be supplied to the load is 1.5A.When the switching frequency is maintained at 2MHz, this electronic component is able to fully play its functions.590μA current is consumed in the case of no external factors.
TPS61311YFFR Features
Available in the 20-UFBGA, DSBGA package
Operating temperature of -40°C~85°C TA
Frequency of 1.92MHz
Supply voltage of 3.6V
Switching frequency of 2MHz
TPS61311YFFR Applications
There are a lot of Texas Instruments
TPS61311YFFR LED Driver ICs applications.
- General lighting
- Down lighting
- Architectural lighting
- Street lighting
- Stage and Studio lighting
- Refrigeration lighting
- Portable lighting
- Gallery lighting
- Museum lighting
- High-end retail lighting