TPS61197DR Overview
Using its 16-SOIC (0.154, 3.90mm Width) package, it is possible to save board space. LED drivers design with 1 outputs.This mounting method is Surface Mount.The system emerges as a DC DC Controller with high efficiency.It is capable of working normally at -40°C~85°C TA.Backlight has considerable advantages.A frequency of 200kHz is used to operate it.The operation of this system is supported by 16 terminations.This configuration is built upon 16 pins.5 segments are present.The mount is in the way of Surface Mount.The LED driver is available under the part number TPS61197.There is no maximum value acceptable for the supply voltage, so 30V is acceptable.Its output voltage is 8V~300V.With 8V as the minimal input voltage, it operates.A minimal supply voltage of 8V is required for it to achieve the highest efficiency.The maximum supply current is 30V.When operating at the maximum output current of 1A, it is capable of providing all the benefits associated with LED drivers.There shouldn't be an increase in output voltage over 300V.The voltage it outputs stays at 8V.
TPS61197DR Features
Available in the 16-SOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 200kHz
Supply voltage of 24V
TPS61197DR Applications
There are a lot of Texas Instruments
TPS61197DR LED Driver ICs applications.
- Gallery lighting
- Museum lighting
- High-end retail lighting
- Medical surgery lighting
- Replacement lamps
- Panel lighting
- Down lights
- Linear fluorescent
- A- lamps
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
