TPS61182RTERG4 Overview

In order to save board space, the 16-WFQFN Exposed Pad package is used. A LED driver using this design has 6 outputs.As a mounting method, Surface Mount is used.It emerges as a DC DC Regulator with high efficiency.It is possible for the led driver ic to operate normally at -40°C~85°C TA.The benefits of Backlight are considerable.The system operates at a frequency of 1.3MHz.For its operation, terminations with a value of 0 are used.A configuration of this chip is made up of 16 pins.It is inevitable that there will be undetermined failures when the supply voltage is less than 5V.A total of 60 segments have been created.Part number TPS61182 represents this LED driver.It is acceptable to supply voltages of 3.6V.38V is the output voltage.In addition, it has 16 pins.A maximum voltage of 24V is optimized for use by this device.Depending on its characteristics, it is classified into Display Drivers.With a minimum input voltage of 2.7V volts, it can operate.For highest efficiency, it works with a minimal supply voltage of 2.7V.In terms of supply current, 3.6V is the maximum value.It is necessary to use 3.15V voltage to power systems.When operating with a maximum output current of 1.5A, it can deliver all the benefits of a LED driver.When no external factors are present, there is 2mA current consumption.A further characteristic of this LED driver is that it is IT ALSO NEED 5 TO 24 V VBAT SUPPLY.

TPS61182RTERG4 Features

Available in the 16-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1.3MHz
Supply voltage of 3.15V
Operating with the supply voltage of 3.15V
IT ALSO NEED 5 TO 24 V VBAT SUPPLY

TPS61182RTERG4 Applications

There are a lot of Texas Instruments
TPS61182RTERG4 LED Driver ICs applications.

• Portable lighting
• Gallery lighting
• Museum lighting
• High-end retail lighting
• Medical surgery lighting
• Replacement lamps
• Panel lighting
• Down lights
• Linear fluorescent
• A- lamps