3/3.3V 0.5mm Gold PMIC TPS61181 16 Pin 1MHz 3.15V 16-WFQFN Exposed Pad

There is also a 16-WFQFN Exposed Pad package that is used to save space on the board. Using this LED driver, there are 6 outputs.As far as mounting is concerned, Surface Mount is adopted.DC DC Regulator emerges with high efficiency and reliability.If the led driver ic is set to -40°C~85°C TA, it will work normally.Backlight has many advantages.It operates on the basis of the frequency of 1MHz.It operates with terminations of 16.This LED driver is configured with a base of 16 pins.If the voltage supply is below 5V, undetermined failures may occur.It is estimated that there are 60 segments.Under the base part number TPS61181, you will find this LED driver.Ideally, the supply voltage should be 3.6V.It produces a voltage of 38V volts.In addition, it is equipped with a total of 16 pins.An optimized supply voltage of 24V is provided.It operates at a voltage of 2.7V as its minimal input voltage.To meet highest efficiency standards, it works on a supply voltage of 2.7V.Supply current cannot exceed 3.6V.With a minimum supply current less than 3mA, this device achieves high efficiency.There is no current available to supply to the load.Powering systems requires an internal voltage of 3.15V.LED drivers can deliver all benefits of 1.5A due to their maximum output current.A current of 2mA is consumed in the absence of external influences.