14 Terminals 2.9V 14-Pin TPS61175 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 200kHz~2.2MHz Cut Tape (CT) 3A Switch 14-PowerTSSOP (0.173, 4.40mm Width)

optimized performance is achieved by utilizing the Cut Tape (CT) package in this voltage regulator. Throughout this voltage regulator, there are 14 terminations. There are two types of analog ICs in this voltage regulator 12v: SWITCHING REGULATOR ICs, which are the ones used in older voltage regulator 12vs. The space-saving 14-PowerTSSOP (0.173, 4.40mm Width) package is available for this voltage regulator. The voltage regulator 12v has 1 outputs. The adjusting voltage regulator generates Adjustable output. As the name implies, this voltage regulator 12v is designed for mounting on a Surface Mount bracket. During switching regulator operation, the operating temperature should remain at -40°C~85°C TA. This voltage regulator 12v reaches a switching frequency of 200kHz~2.2MHz. The regulator is capable of operating with a dc to dc voltage regulator's minimum input voltage of 2.9V. A maximum design flexibility is provided by the 3A Switch output current of voltage regulator. A regulator voltage's peak reflow temperature amounts to 260 being indestructible. The voltage regulator 12v is designed to provide a nominal input voltage of 3.6V for operation. In the particular voltage regulators, the TPS61175 family is represented. A voltage of 38V volts can be generated by DC DC switching regulator. There are 14 pins used for switching regulator operation. For this switching regulator, we recommend keeping the output voltage at at least 2.9V volts. A 3A A maximum output current is required to meet the switching regulator operation requirements. With a maximum output voltage of 38V, DC DC switching regulator has a very high efficiency. With 18V as the supply voltage, this DC-DC switching regulator will operate. External factors have no impact on DC DC switching regulator's ability to consume 3mA A of quiescent current.