TPS61165DRVT Overview
There is also a 6-WDFN Exposed Pad package that is used to save space on the board. Using this LED driver, there are 1 outputs.As far as mounting is concerned, Surface Mount is adopted.DC DC Regulator emerges with high efficiency and reliability.If the led driver ic is set to -40°C~85°C TA, it will work normally.Automotive, Backlight has many advantages.It operates with terminations of 6.This LED driver is configured with a base of 6 pins.It is estimated that there are 10 segments.Under the base part number TPS61165, you will find this LED driver.Ideally, the supply voltage should be 18V.It produces a voltage of 3V~38V volts.In addition, it is equipped with a total of 6 pins.Additionally, it is categorized into Display Drivers according to its characteristics.It operates at a voltage of 3V as its minimal input voltage.To meet highest efficiency standards, it works on a supply voltage of 3V.Supply current cannot exceed 18V.With a minimum supply current less than 2.3mA, this device achieves high efficiency.There is no current available to supply to the load.The electronic component can fully perform its functions if the switching frequency is maintained at 1.2MHz.A current of 1.5mA is consumed in the absence of external influences.
TPS61165DRVT Features
Available in the 6-WDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1.2MHz
TPS61165DRVT Applications
There are a lot of Texas Instruments
TPS61165DRVT LED Driver ICs applications.
- Museum lighting
- High-end retail lighting
- Medical surgery lighting
- Replacement lamps
- Panel lighting
- Down lights
- Linear fluorescent
- A- lamps
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Industrial LED Lighting: Image Recognition Devices