TPS61160DRVTG4 Overview
Using its 6-WDFN Exposed Pad package, it is possible to save board space. LED drivers design with 1 outputs.This mounting method is Surface Mount.The system emerges as a DC DC Regulator with high efficiency.It is capable of working normally at -40°C~85°C TA.Backlight has considerable advantages.A frequency of 600kHz is used to operate it.The operation of this system is supported by 6 terminations.This configuration is built upon 6 pins.10 segments are present.The LED driver is available under the part number TPS61160.There is no maximum value acceptable for the supply voltage, so 18V is acceptable.Its output voltage is 26V.The device has a pin count of 6.In addition to Display Drivers, it is also classified by its characteristics.With 2.7V as the minimal input voltage, it operates.A minimal supply voltage of 2.7V is required for it to achieve the highest efficiency.The maximum supply current is 18V.It is possible to provide high efficiency when the maximal supply current is less than 1.8mA.700mA is the maximum amount of current that can be supplied to the load.There is no external factor that can consume current, so 1.5mA current is consumed.
TPS61160DRVTG4 Features
Available in the 6-WDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 600kHz
Supply voltage of 3.6V
TPS61160DRVTG4 Applications
There are a lot of Texas Instruments
TPS61160DRVTG4 LED Driver ICs applications.
- Gallery lighting
- Museum lighting
- High-end retail lighting
- Medical surgery lighting
- Replacement lamps
- Panel lighting
- Down lights
- Linear fluorescent
- A- lamps
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights