TPS61151DRCR Overview
As a result of its 10-VFDFN Exposed Pad package, it helps to save board space on the board. It has 2 outputs for LED drivers.We are using Surface Mount as the mounting method.With high efficiency, it emerges as a DC DC Regulator.It is possible for the led driver ic to function normally at -40°C~85°C TA.It is clear that Backlight will benefit from the program.Using the frequency of 1.2MHz, it operates.In order for it to operate, it has 10 terminations.The base is configured with 10 pins.There are 14 segments in it.You can find this LED driver under the base part number TPS61151.6V is an acceptable maximum value for the supply voltage.There are 10 pins on this device.In addition, it can also be categorized into Display Drivers based on its characteristics.This device operates with a minimum input voltage of 3V volts.The system operates at a minimum supply voltage of 2.5V in order to achieve maximum efficiency.Currently, the supply current can only reach 6V.When the supply current should be less than 2mA, the device will provide high efficiency.700mA is the maximum current the load can handle.LED drivers deliver all their benefits with a maximum output current of 35mA.The consumption of current is 2mAin the absence of external factors.It is recommended that the output voltage be no higher than 27V.A voltage of 2.5V is maintained as the minimal voltage it outputs.
TPS61151DRCR Features
Available in the 10-VFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
Supply voltage of 3.6V
TPS61151DRCR Applications
There are a lot of Texas Instruments
TPS61151DRCR LED Driver ICs applications.
- High-end retail lighting
- Medical surgery lighting
- Replacement lamps
- Panel lighting
- Down lights
- Linear fluorescent
- A- lamps
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Industrial LED Lighting: Image Recognition Devices
- Stage Lighting and Signage
