TPS61054DRCT Overview
The 10-VFDFN Exposed Pad package is used for saving board space. LED drivers with this design have 1 outputs.For mounting, it uses the Surface Mount method.It emerges as a DC DC Regulator, which is efficient and reliable.The led light driver is capable of operating at the operating temperature of -40°C~85°C TA.There are considerable benefits for Camera Flash, Lighting.There are 10 terminations that are designed to operate with it.The configuration of the board is built around 10 pins.Segments counted are 1.It is under the base part number TPS61054 that you can find this LED driver.6V is a maximum acceptable voltage for the supply.A voltage of 5.5V is produced by it.There are 10 pins on it.In addition, its characteristics are classified into MOSFET Drivers.A minimal input voltage of 2.5V is required for it to operate.A minimum supply voltage of 2.5V is required to meet the highest efficiency standards.6V is the maximum value of the supply current.It is capable of delivering high efficiency when the maximal supply current is below 8.5mA.It is possible to supply the load with 1.2A current.The electronic component can function fully when the switching frequency is maintained at 2MHz.At maximum output current 1.2A, it will deliver all the benefits of a LED driver.There is no external factor that consumes current when there is 8.5mA current consumption.
TPS61054DRCT Features
Available in the 10-VFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 2MHz
TPS61054DRCT Applications
There are a lot of Texas Instruments
TPS61054DRCT LED Driver ICs applications.
- Street lighting
- Stage and Studio lighting
- Refrigeration lighting
- Portable lighting
- Gallery lighting
- Museum lighting
- High-end retail lighting
- Medical surgery lighting
- Replacement lamps
- Panel lighting