TPS61052DRCT Overview
Using its 10-VFDFN Exposed Pad package, it is possible to save board space. LED drivers design with 1 outputs.This mounting method is Surface Mount.The system emerges as a DC DC Regulator with high efficiency.It is capable of working normally at -40°C~85°C TA.Camera Flash has considerable advantages.A frequency of 2MHz is used to operate it.The operation of this system is supported by 10 terminations.This configuration is built upon 10 pins.1 segments are present.The LED driver is available under the part number TPS61052.There is no maximum value acceptable for the supply voltage, so 6V is acceptable.Its output voltage is 5.5V.The device has a pin count of 10.In addition to Display Drivers, it is also classified by its characteristics.With 2.5V as the minimal input voltage, it operates.A minimal supply voltage of 2.5V is required for it to achieve the highest efficiency.The maximum supply current is 6V.It is possible to provide high efficiency when the maximal supply current is less than 8.5mA.1.2A is the maximum amount of current that can be supplied to the load.When operating at the maximum output current of 1.2A, it is capable of providing all the benefits associated with LED drivers.There is no external factor that can consume current, so 8.5mA current is consumed.
TPS61052DRCT Features
Available in the 10-VFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 2MHz
Supply voltage of 3.6V
TPS61052DRCT Applications
There are a lot of Texas Instruments
TPS61052DRCT LED Driver ICs applications.
- Gallery lighting
- Museum lighting
- High-end retail lighting
- Medical surgery lighting
- Replacement lamps
- Panel lighting
- Down lights
- Linear fluorescent
- A- lamps
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights