TPS61050YZGT Overview

There is also a 12-UFBGA, DSBGA package that is used to save space on the board. Using this LED driver, there are 1 outputs.As far as mounting is concerned, Surface Mount is adopted.DC DC Regulator emerges with high efficiency and reliability.If the led driver ic is set to -40°C~85°C TA, it will work normally.Camera Flash has many advantages.It operates on the basis of the frequency of 2MHz.It operates with terminations of 12.This LED driver is configured with a base of 12 pins.It is estimated that there are 1 segments.Under the base part number TPS61050, you will find this LED driver.Ideally, the supply voltage should be 6V.It produces a voltage of 5.5V volts.In addition, it is equipped with a total of 12 pins.Additionally, it is categorized into Display Drivers according to its characteristics.It operates at a voltage of 2.5V as its minimal input voltage.To meet highest efficiency standards, it works on a supply voltage of 2.5V.Supply current cannot exceed 6V.With a minimum supply current less than 8.5mA, this device achieves high efficiency.There is no current available to supply to the load.LED drivers can deliver all benefits of 1.2A due to their maximum output current.A current of 8.5mA is consumed in the absence of external influences.

TPS61050YZGT Features

Available in the 12-UFBGA, DSBGA package
Operating temperature of -40°C~85°C TA
Frequency of 2MHz
Supply voltage of 3.6V

TPS61050YZGT Applications

There are a lot of Texas Instruments
TPS61050YZGT LED Driver ICs applications.

• Museum lighting
• High-end retail lighting
• Medical surgery lighting
• Replacement lamps
• Panel lighting
• Down lights
• Linear fluorescent
• A- lamps
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• Industrial LED Lighting: Image Recognition Devices