16 Terminals 1.8V 16-Pin TPS61030 DC DC Voltage Regulator BATTERY CHARGE CONTROLLER 1 Outputs 600kHz Tube 3.6A Switch 16-PowerTSSOP (0.173, 4.40mm Width)

It is designed to provide optimal performance by utilizing the Tube package. There are 16 terminations in this harley voltage regulator. As this regulator voltage is equipped with an analog IC of the type BATTERY CHARGE CONTROLLER, it is a BATTERY CHARGE CONTROLLER-type voltage regulator. For space-saving purposes, this voltage regulator is available in the 16-PowerTSSOP (0.173, 4.40mm Width) package. A total of 1 outputs are configured in this voltage regulator. On the output pins of this DC DC switching regulator, there is a Adjustable output generated. Surface Mount-mount switching regulator. -40°C~85°C TA should be the operating temperature when voltage regulator is operating. Voltage regulator's switching frequency reaches 600kHz. The voltage regulator can be operated with a voltage as low as 1.8V as an input voltage. DC DC switching regulator's 3.6A Switch output current allows for maximum design flexibility. With its peak reflow temperature of 260, this voltage regulator is essentially indestructible. To meet the operation requirements, voltage regulator is designed to provide 2.4V as the nominal input voltage. In this case, the DC/DC regulator belongs to the family TPS61030. Voltage can be produced at 5.5V volts by voltage regulator. The switching regulator operation of the system is controlled by 16 pins. In order to use this voltage regulator 12v at its full potential, the output voltage should be kept at at least 1.8V. A maximum output current of 1A A is available to meet the switching regulator operation requirements. The maximum voltage of voltage regulator 12v DC DC switching regulator can produce is 5.5V, which is the highest available. An input voltage of 5.5V is used to operate this harley voltage regulator. No external factors affect how much current harley voltage regulator consumes.