10 Terminals 0.8V 10-Pin TPS61012 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 500kHz Tube 540mA Switch 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Using the Tube package, this voltage regulator optimizes the performance of the voltage regulator 12v. A voltage regulator consists of 10 terminations. There is a SWITCHING REGULATOR type analog IC in this voltage regulator 12v that is used to convey analog signals. There is a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package available for this voltage regulator, as DC DC switching regulator is space-saving. 1 outputs have been configured in the voltage regulator 12v. On its output pins, this adjusting voltage regulator generates Fixed output. Switching regulators like this one can be mounted on the Surface Mount mounting system. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~85°C TA. In this voltage regulator 12v, the switching frequency is 500kHz. Regulator 0.8V can operate with dc to dc voltage regulator's minimum input voltage 0.8V. DC DC switching regulator's maximum design flexibility comes from its output current of 540mA Switch. A regulator with this 260 peak reflow temperature is essentially indestructible. For operation, switching regulator requires a nominal input voltage of 1.2V. TPS61012 is a family of voltage regulators that belong to the DC/DC industry. Voltage regulator is capable of giving voltage at 1.8V volts. In order to operate voltage regulator, 10 pins are required. This voltage regulator 12v should be configured with an output voltage that is at least 1.8V. Using this voltage regulator 12v, you will be able to get the maximum output voltage of 1.8V. With a supply voltage of 1.8V, this harley voltage regulator works. Without external influences, harley voltage regulator consumes 50μAA of quiescent current.