5 Terminals 5-Pin TPS60401 DC DC Voltage Regulator SWITCHED CAPACITOR CONVERTER 1 Outputs Tape & Reel (TR) SC-74A, SOT-753

It uses the Tape & Reel (TR) package in order to optimize the performance of this voltage regulator. During the development of this harley voltage regulator, 5 terminations were made. A SWITCHED CAPACITOR CONVERTER type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. The harley voltage regulator is available as a SC-74A, SOT-753 package to save space. The voltage regulator is configured with 1 outputs. As you can see, this DC DC switching regulator generates Fixed output on its output pins. A Surface Mount mounting is required for this switching regulator. Voltage regulators should be operated at -40°C~125°C TJ temperature while operating. In this adjusting voltage regulator, the output voltage (Min/Fixed) equates to -Vin 2Vin Vin/2. This voltage regulator's peak reflow temperature is so high as to make it virtually indestructible. For operation, voltage regulator provides a nominal input voltage of 5V. There is a DC/DC regulator in this family that belongs to the TPS60401 family. At -5.25V volts, voltage regulator can provide voltage. To operate the voltage regulator 12v, 5 pins are required. The output voltage of this voltage regulator 12v should at least be set at -1.6V volts at all times. Accordingly, dc to dc voltage regulator's maximum output current is 60mA A. A maximum voltage of -5.25V can be obtained from the regulator voltage. Voltage regulator consumes 65μA A of quiescent current without being affected by outside forces. In order to ensure reliable performance, the dc to dc voltage regulator's minimum supply voltage is 1.8V volts. An operating voltage of 5.25V is the maximum supply voltage DC DC switching regulator can operate at. A frequency of 20kHz allows dc to dc voltage regulator to maintain high accuracy. It operates on a 70μA supply current of adjusting voltage regulator.