10 Terminals 0.9V 10-Pin TPS60303 DC DC Voltage Regulator SWITCHED CAPACITOR REGULATOR 2 Outputs 700kHz Cut Tape (CT) 40mA 20mA 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
For optimal performance, this voltage regulator makes use of the Cut Tape (CT) package. In this voltage regulator, there are a total of 10 terminations. There is one type of analog IC that this voltage regulator is equipped with, and that is the SWITCHED CAPACITOR REGULATOR type. In order to save space, this harley voltage regulator is available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. There are 2 outputs configured on this voltage regulator 12v. There are output pins on this DC DC switching regulator that generate Fixed output. Surface Mount-mounting is compatible with this switching regulator. The operating temperature should be kept at -40°C~125°C TJ when the voltage regulator 12v is in operation. This DC-DC switching regulator has a switching frequency of 700kHz. The voltage regulator can operate with a dc to dc voltage regulator's minimum input voltage of 0.9V. As a result, the output voltage of the voltage regulator 12v (Min/Fixed) is 2Vin 3V. It features maximum design flexibility due to dc to dc voltage regulator's 40mA 20mA output current. 260 is essentially indestructible due to DC DC switching regulator's peak reflow temperature. In order to meet the operation requirements,voltage regulator is designed to provide a nominal input voltage of 1V. The TPS60303 family of DC/DC regulators includes this DC/DC regulator. The voltage DC DC switching regulator can produce is 3.6V volts. There are 10 pins that are used for the operation of the voltage regulator 12v. There should be at least a 2.88V volt output voltage for this switching regulator in order to make it work properly. The maximum output current reaches 20mA A to meet the switching regulator operation requirements. The maximum output voltage of this regulator voltage is 3.12V. Despite external influences, voltage regulator consumes 35μA A of quiescent current. A dc to dc voltage regulator's dc to dc voltage regulator's minimum supply voltage of 900mV V ensures reliable performance. There is a maximum supply voltage of 1.8V at which DC DC switching regulator can operate.