10 Terminals 0.9V 10-Pin TPS60300 DC DC Voltage Regulator SWITCHED CAPACITOR REGULATOR 2 Outputs 700kHz Tube 40mA 20mA 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

optimized performance is achieved by utilizing the Tube package in this voltage regulator. Throughout this voltage regulator, there are 10 terminations. There are two types of analog ICs in this voltage regulator 12v: SWITCHED CAPACITOR REGULATOR ICs, which are the ones used in older voltage regulator 12vs. The space-saving 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package is available for this voltage regulator. The voltage regulator 12v has 2 outputs. The adjusting voltage regulator generates Fixed output. As the name implies, this voltage regulator 12v is designed for mounting on a Surface Mount bracket. During switching regulator operation, the operating temperature should remain at -40°C~125°C TJ. This voltage regulator 12v reaches a switching frequency of 700kHz. The regulator is capable of operating with a dc to dc voltage regulator's minimum input voltage of 0.9V. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 2Vin 3.3V. A maximum design flexibility is provided by the 40mA 20mA output current of voltage regulator. A regulator voltage's peak reflow temperature amounts to 260 being indestructible. The voltage regulator 12v is designed to provide a nominal input voltage of 1V for operation. In the particular voltage regulators, the TPS60300 family is represented. A voltage of 3.6V volts can be generated by DC DC switching regulator. There are 10 pins used for switching regulator operation. For this switching regulator, we recommend keeping the output voltage at at least 3.17V volts. A 20mA A maximum output current is required to meet the switching regulator operation requirements. With a maximum output voltage of 3.43V, DC DC switching regulator has a very high efficiency. External factors have no impact on DC DC switching regulator's ability to consume 35μA A of quiescent current. In this case, a dc to dc voltage regulator's minimum supply voltage of 900mV volts is required to ensure reliable performance. It is able to operate from a maximum supply voltage of 1.8V, which is suitable for DC DC switching regulator's operation.