10 Terminals 10-Pin TPS60205 DC DC Voltage Regulator SWITCHED CAPACITOR REGULATOR 1 Outputs 300kHz Cut Tape (CT) 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

It is designed to provide optimal performance by utilizing the Cut Tape (CT) package. There are 10 terminations in this harley voltage regulator. As this regulator voltage is equipped with an analog IC of the type SWITCHED CAPACITOR REGULATOR, it is a SWITCHED CAPACITOR REGULATOR-type voltage regulator. For space-saving purposes, this voltage regulator is available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. A total of 1 outputs are configured in this voltage regulator. On the output pins of this DC DC switching regulator, there is a Fixed output generated. Surface Mount-mount switching regulator. -40°C~125°C TJ should be the operating temperature when voltage regulator is operating. Voltage regulator's switching frequency reaches 300kHz. With its peak reflow temperature of 260, this voltage regulator is essentially indestructible. To meet the operation requirements, voltage regulator is designed to provide 2.4V as the nominal input voltage. In this case, the DC/DC regulator belongs to the family TPS60205. Voltage can be produced at 3.3V volts by voltage regulator. The switching regulator operation of the system is controlled by 10 pins. In order to use this voltage regulator 12v at its full potential, the output voltage should be kept at at least 3.17V. A maximum output current of 100mA A is available to meet the switching regulator operation requirements. The maximum voltage of voltage regulator 12v DC DC switching regulator can produce is 3.43V, which is the highest available. No external factors affect how much current harley voltage regulator consumes. By requiring a minimum voltage of 1.6VV, adjusting voltage regulator reliable performance is guaranteed. The maximum supply voltage for the voltage regulator 12v is 3.6V, so DC DC switching regulator can operate with a maximum voltage of 3.6V.