20 Terminals 20-Pin TPS60124 DC DC Voltage Regulator SWITCHED CAPACITOR REGULATOR 1 Outputs 320kHz Tube 20-PowerTSSOP (0.173, 4.40mm Width)
optimized performance is achieved by utilizing the Tube package in this voltage regulator. Throughout this voltage regulator, there are 20 terminations. There are two types of analog ICs in this voltage regulator 12v: SWITCHED CAPACITOR REGULATOR ICs, which are the ones used in older voltage regulator 12vs. The space-saving 20-PowerTSSOP (0.173, 4.40mm Width) package is available for this voltage regulator. The voltage regulator 12v has 1 outputs. The adjusting voltage regulator generates Fixed output. As the name implies, this voltage regulator 12v is designed for mounting on a Surface Mount bracket. During switching regulator operation, the operating temperature should remain at -40°C~85°C TA. This voltage regulator 12v reaches a switching frequency of 320kHz. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 3V. A regulator voltage's peak reflow temperature amounts to 260 being indestructible. The voltage regulator 12v is designed to provide a nominal input voltage of 2V for operation. In the particular voltage regulators, the TPS60124 family is represented. A voltage of 3V volts can be generated by DC DC switching regulator. There are 20 pins used for switching regulator operation. For this switching regulator, we recommend keeping the output voltage at at least 2.88V volts. A 200mA A maximum output current is required to meet the switching regulator operation requirements. With a maximum output voltage of 3.3V, DC DC switching regulator has a very high efficiency. External factors have no impact on DC DC switching regulator's ability to consume 55μA A of quiescent current. In this case, a dc to dc voltage regulator's minimum supply voltage of 1.8V volts is required to ensure reliable performance. It is able to operate from a maximum supply voltage of 3.6V, which is suitable for DC DC switching regulator's operation.