Fixed PMIC 20 Pin HTSSOP EP
HTSSOP EP packaging is voltage regulators' for voltage regulators' transportation.There are total of 1 outputs that are supported by voltage regulator.A 20 pattern is used for this voltage regulator's pin arrangement.It can be used in many different applications due to its output voltage of 3.3 V.A voltage of 1.8 V is required for this regulator.It is possible to use 3.6 V voltage with this voltage regulator.An output type Fixed is used for this regulator controller.The DC DC Switching Regulator should output 200 mA at the moment.Regulator controller displays a quiescent current of 50 µA.Maximum current 200 mA will be produced by it.There is a voltage limit of 3.17 V on the output of this controller.The temperature must be higher than -40 °C for the voltage regulator to function.Using higher temperatures than 85 °C is not recommended.The maximum voltage that can be output by this voltage regulator is 3.47 V voltage.