SIP4282DVP-3-T1-E3 Overview
A Tape & Reel (TR) is used to package it.In the PowerPAK® SC-75-6L package, it is included.The LED driver is mounted as Surface Mount.General Purpose is the switch type it owns.To ensure reliable operation, set the temperature to -40°C~125°C TJ.As a default, the output is set to 1.A voltage of Not Required is used to power it.There is a maximum output voltage of P-Channel volts on this LED driver.A lighting driver with Load Discharge, Slew Rate Controlled features is available.It is a member of the SIP4282 family.In total, there are 6 terminations.The operation is carried out using the 6 pins.As far as the lighting driver is concerned, there are 1 functions.In this case, the LED driving board can produce only 1.4AV as its maximum output.The maximum output current is reduced to 3A to meet the operation criteria.Using a voltage of 5V allows for high efficiency.Surface Mount is mounted in the way of this lighting driver.The LED driving board is equipped with a total of 6 pins.It has a resistance of 105mOhm.This case has the output current set to 1.2A.A maximum supply voltage of 5.5V is set in Vsup.2/5V is the power supply of the part.
SIP4282DVP-3-T1-E3 Features
Supplied from 5V
Resistance of 105mOhm
SIP4282DVP-3-T1-E3 Applications
There are a lot of Vishay Siliconix
SIP4282DVP-3-T1-E3 Power Switches ICs applications.
- Set-top-box
- USB Power Distribution
- Notebook PC
- Telecom and Network Systems
- PC Card Hot Swap
- Storage Drives
- Portable/Handheld Devices
- Wireless/Networking Cards
- Low Voltage I/O System Power
- Hard Disk Drives