3V DC DC Voltage Regulator 1 Output Outputs 300kHz ~ 1MHz Cut Tape 24A MLP44-24

A Cut Tape package is used in this voltage regulator to optimize performance. In order to save space, this voltage regulator is packaged in the MLP44-24 package. 1 Output outputs of voltage regulator are configured. Adjustable outputs are generated on the output pins of this adjusting voltage regulator. A voltage regulator 12v such as this one fits the Surface Mount mounting bracket. Keeping dc to dc voltage regulator's operating temperature at -40 to 125 °C is essential when operating. A DC-DC switching regulator such as this one switches at 300kHz ~ 1MHz. Voltage regulators like this one can operate at least with 3V as the dc to dc voltage regulator's minimum input voltage. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.6V. This voltage regulator 12v features maximum design flexibility thanks to its 24A output current. As far as the voltage input is concerned, DC DC switching regulator can accept up to 24V. The voltage DC DC switching regulator can provide is up to 600 mV to 21.6 V volts. The maximal output voltage of 21.6V allows adjusting voltage regulator for simple operation. Known as a switching DC-DC regulator, this electronic voltage regulator 12v is part of the SIC431 family. There are 24 pins on this voltage regulator. Powered by a 50 uA supply current, this DC-DC switching regulator works as a converter between DC and DC. Using 300 kHz to 1 MHz as an adjusting voltage regulator's switching frequency could result in improved reliability. 24 A amps is the standard output current of DC DC switching regulator.