20 Terminals 10V~13.2V 20-Pin SI9122 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 500kHz Transistor Driver

In the PowerPAK® MLP65-20 package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tape & Reel (TR) solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 10V~13.2V volts and has 10V~13.2V supply voltage. Suitable for working in an dc switcher that has a -40°C~85°C TA. It can switch at 500kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Current Limit, Sequencing, Soft Start is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 20 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. In addition to "SI9122", there are other relevant dc to dc converter ics you can find. There are 20 pins on switching converter. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. DC regulator750kHz has the maximum frequency. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 72V. As a result, switching converter outputs current to the greatest value possible (1A).