Enable, Power On Reset Fixed 0.5 mm MIC5332 PMIC -- Series 8-VFDFN Exposed Pad, 8-MLF®

In the case of Tape & Reel (TR) cases, the regulater IC is delivered. Packaging of the Liner regulator IC takes the form of a 8-VFDFN Exposed Pad, 8-MLF® case. Fixed is the Voltage Regulator Chip's output type. Linear IC consists of 2 battery regulators. The range of operating temperatures of Surface Mount are programmable in the Voltage Regulator Chip, so that the temperature can be varied as desired. Keeping the temperature at -40°C~125°C degrees is necessary for this regulator to function. There is an output function of Positive configured for this regulator. Currently, 300mA, 300mA are being output by it at the moment. The part includes 2 Output outputs in order to ensure that the voltage regulator IC performs effectively and in a timely manner. This voltage regulator IC has a dropout voltage of 10 volts. On the chip, there are pins for the 8 axis. Here's the basic part number for this IC regulator: MIC5332. This voltage regulator IC is what is known as a standard PMIC - Power Management ICs component. This device has a regulator type called FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR, which means it operates on a DC voltage. Packing the voltage regulator IC is done in a method called TR. Upon reaching its maximal output current, 300mA, it is able to satisfy the operation requirements. It operates in the 25 uA Quiescent Current state. The phone is a member of the -- Series. In the event that the temperature in your room falls below 125°C, then this feature should be used at such a time. During the operation of the chip, the chip's operating temperature is not less than -40°C degrees.