Enable Fixed 0.5 mm MIC5330 PMIC -- Series 8 8-VFDFN Exposed Pad, 8-MLF®
Tape & Reel (TR) cases are used for delivery. The Liner regulator IC is packaged in 8-VFDFN Exposed Pad, 8-MLF® case. Fixed is the output type of the Voltage Regulator IC. As part of this electrical component, 2 regulators are implemented. Variations are made to the Surface Mount operating temperature range by the Voltage Regulator IC. Default settings are set to -40°C~125°C degrees. There is a Positive configured as the output function for this IC regulator. There is a current output of 300mA, 300mA from this regulator IC. On this chip, there are a total of 8 pins in total. There are 2 outputs total on this voltage regulator IC in order to ensure that prompt and sufficient performance is achieved. There is a dropout voltage of 10 volts on this IC regulator. Chips have 8 pins. For your information, the basic part number for this regulator IC is MIC5330. In this case, we have a typical PMIC - Power Management ICs component. There is one type of regulator for this device, which is FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR. This IC regulator is a part of the -- Series of devices. You should use the regulator IC when the temperature is below 125°C. It is not possible to operate the chip below -40°C operating temperature.