Enable Fixed 0.5mm MIC5264 PMIC - Series 10-VFDFN Exposed Pad, 10-MLF®

The package is delivered in a Tape & Reel (TR) case. In order to package the IC voltage regulator, a 10-VFDFN Exposed Pad, 10-MLF® case is used. On the Voltage regulator IC, there are 10 terminations that can be connected. This IC Regulator has a type of output called Fixed. There are 2 regulators implemented in this electroic component. Surface Mount can be adjusted in the Linear IC in order to vary the temperature range over which Linear Regulator operates. The IC voltage regulator must be maintained at -40°C~125°C degrees for it to function. As you can see, this regulator's output function is configured to be Positive. At present, it can produce an output of up to 150mA, 150mA. The regulator has a total of 2 outputs to make sure that it delivers prompt, sufficient outputs. A dropout voltage of 10 volts is what makes it a dropout voltage. Depending on the chip, 10 pins may be available. For your information, part number MIC5264 is the basic part number for this voltage regulator IC. As you can see, this regulator IC represents a typical PMIC - Power Management ICs component. As far as the regulator type, it is a FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR type. The - Series is a series of products made by D-Link.