Enable Adjustable 1.702 mm MIC29502 PMIC -- Series 5 TO-263-6, D2Pak (5 Leads + Tab), TO-263BA

An Tape & Reel (TR) case is included with the delivery. There is a TO-263-6, D2Pak (5 Leads + Tab), TO-263BA case with the integrated voltage regulator. In terms of output type, Adjustable is what the Regulator IC produces. The electronic component implements 1 Voltage regulator ICs. IC Regulator is possible to alter the range of the operating temperature of Surface Mount in the device. In order for this IC voltage regulator to operate, the temperature has to be kept at -40°C~125°C degrees. In this case, the output function that is configured for this regulator IC is Positive. There is an 5Amp current output on this voltage regulator IC. It has a total of 5 pins on IC voltage regulator. In order to ensure prompt, adequate, and prompt performance, this regulator has 1 outputs in total. In terms of its dropout voltage, it is 10 volts. There are 6 pins on the chip. It is MIC29502 for this regulator, just for your information. In this instance, we are dealing with a typical PMIC - Power Management ICs-shaped component. It is worth mentioning that the regulator type for this regulator IC is ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR. In order to meet the operating requirements of the regulator, its maximal output current reaches 5A. It operates in the 50mA Quiescent Current state. This regulator IC is a part of the -- Series. Utilize the regulator IC when the temperature is below 125°C. It is recommended that the chip be operated at a temperature no lower than -40°C operating temperature. The tolerance on this voltage regulator IC is 1 %, a relatively low value.