Enable Fixed 1.7 mm MIC29371-12 PMIC -- Series TO-263-6, D2Pak (5 Leads + Tab), TO-263BA

A Tube case is used to deliver the Voltage Regulated IC. A TO-263-6, D2Pak (5 Leads + Tab), TO-263BA case is used for packaging. Regulator IC chip's output type is Fixed. The electronic part implements 1 regulators in total. In this Regulator IC chip, the operating temperature of Surface Mount varies. -40°C~125°C degrees is the operating temperature of the Voltage Regulator IC. There is one output function configured for this voltage regulator IC, and that is Positive. As far as its current output is concerned, it stands at 750mA. It has 1 Output outputs to ensure that the performance of this regulator is prompt and sufficient. The dropout voltage of the regulator IC is 10 volts. 6 pins are on the chip. For your information, this regulator's basic part number is MIC29371-12. The component shown here is a typical PMIC - Power Management ICs component. It is important to note that this device has a FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR regulator type. It operates in the 160 uA Quiescent Current state. Among the -- Series, the IC voltage regulator is one of the most popular models. The temperature should be below 125°C when you use the IC voltage regulator. There is no operating temperature below -40°C for the chip.