0.4 mm PMIC -- Series MIC2871 16 Pin 2MHz 14-WFDFN Exposed Pad
The board's 14-WFDFN Exposed Pad package saves space. LED drivers designed using this technology use 1 outputs.The led driver mounting is done by using Surface Mount.It is highly reliable and high-performing when it emerges as a DC DC Regulator.-40°C~125°C TJ is the operating temperature for the led light driver.As a result, Camera Flash is likely to benefit greatly.It operates at 2MHz frequency.With 16 pins at the base, this LED driver has a base configuration.Undetermined failures can occur if the voltage supply is below 2.7V.It is estimated that there are 1 segments.The device has been mounted on the Surface Mount.MIC2871 is the base part number for the LED driver.It is acceptable to supply voltages of 5.5V volts.-- is the voltage output.14 pins are available on the device.There is a maximum value of 5.5V supply voltage supported by this device. Additionally, it can be classified as Driver ICs based on its characteristics.Its high efficiency is based on the fact that the maximal supply current should not exceed 230μA.A stable operating temperature of 125°C is required.The load is capable of receiving 1.2A current.Operating temperatures should be above -40°C to ensure stable operation.Several applications make use of this LED driver from the -- series.The interface IC that the part is equipped with is indicated by LED DISPLAY DRIVER.There is Adjustable voltage output from it.There are 1 transmission channels available.