0.4 mm PMIC - Series MIC2871 14 Pin 2MHz 14-WFDFN Exposed Pad

In order to save board space, the led driver uses the 14-WFDFN Exposed Pad package. For the design of this LED driver, 1 outputs are used.The mounting method is Surface Mount.As a DC DC Regulator, it has high efficiency and reliability.The led light driver operates normally at -40°C~125°C TJ. The benefits it provides to Camera Flash are considerable.In this case, the frequency is 2MHz.To form its configuration, 14 pins are used.A voltage supply less than 2.7V will cause undetermined failures.The segment count is 1.Surface Mount is mounted in the way.There is a base part number MIC2871 for this LED driver.A maximum supply voltage of 5.5V is acceptable.There is - voltage output from it.It is designed to provide a supply voltage of 5.5V at its maximum.When the input voltage is set to 2.7V, it operates.Supply current is limited to 5.5V at its maximum value.An operating temperature above 125°C should ensure stable operation.A load can be supplied with 1.2A current.As a condition for achieving stable operation, the operating temperature should be greater than -40°C.It is capable of fulfilling its full functionality when the switching frequency remains at 2MHz.LED drivers from the - series are essential components for a wide variety of products.In this part, LED DISPLAY DRIVER refers to the interface IC.